Q. hi
im planning to buy a lcd monitor most prebably a hp lg or some thing similar
so here are the main things
1. it should be cheap around 150 dollars
2.it should be of good quality
3.if it has a dvi port that will be good !
4.it should be new and not out of date
5. sure it should be available in black
thanks for reading
im planning to buy a lcd monitor most prebably a hp lg or some thing similar
so here are the main things
1. it should be cheap around 150 dollars
2.it should be of good quality
3.if it has a dvi port that will be good !
4.it should be new and not out of date
5. sure it should be available in black
thanks for reading
A. Got it!!!
You want Value for your money but surely you want Quality...
You have your target Price for the Monitor that is with Quality ..
Try to look for "ViewSonic" same Specs with the Branded Ones with reasonable Price...
But be wise enough to choose the right Model that has good resolution and Fast Response Time you could find...
2Ms or 4Ms response Time is better to to prevent "Ghosting and Blurr" specially when you are into Gaming and Video...
A good Resolution for a 19" LCD Monitor are[1440x900] or [1280x1024]
-----------------------------------------------------------For 20"/21" or 22" the Best Resolution is[1680x1050]
-----------------------------------------------------------I
For:17" monitor the best Resolution would be...
[1440x900] and [1280x1024]
-----------------------------------------------------------
Regarding "LG" brand they don't produced good quality in "LCD" Monitors ...Tho!
But in "CRT" monitors they are one of the best in the Market....
I hope I give a little INFO...
You want Value for your money but surely you want Quality...
You have your target Price for the Monitor that is with Quality ..
Try to look for "ViewSonic" same Specs with the Branded Ones with reasonable Price...
But be wise enough to choose the right Model that has good resolution and Fast Response Time you could find...
2Ms or 4Ms response Time is better to to prevent "Ghosting and Blurr" specially when you are into Gaming and Video...
A good Resolution for a 19" LCD Monitor are[1440x900] or [1280x1024]
-----------------------------------------------------------For 20"/21" or 22" the Best Resolution is[1680x1050]
-----------------------------------------------------------I
For:17" monitor the best Resolution would be...
[1440x900] and [1280x1024]
-----------------------------------------------------------
Regarding "LG" brand they don't produced good quality in "LCD" Monitors ...Tho!
But in "CRT" monitors they are one of the best in the Market....
I hope I give a little INFO...
what is is a LCD TV?
Q.
A. Liquid crystal display television (LCD TV) is television that uses LCD technology for its visual output. The technology used is generally TFT. It differs from alternate visual output technologies, such as cathode ray tube (CRT) or plasma display (PDP TV).
Early LCD television had drawbacks relative to traditional visual display technologies. It displayed fast-moving action with "ghosting" and could be viewed best only when looking directly at the screen or from a slight angle. These problems have largely been overcome in recent years, and LCD televisions, along with plasma displays, have taken over the dominant market position worldwide from cathode ray displays. The LCD design has the additional advantage of being more efficient in the use of electricity than the CRT design.
Modern LCD TV sets are geographically universal because they have a multisystem tuner, to display PAL, NTSC and SECAM norms. They also include an electronic (step-down & step-up) transformer that automatically can use 110/250 V AC indifferently and universal grounded adapter plugs.
Also, the vast majority are no longer just for TV and HDTV (DVB). They can also be used as a computer monitor with a VGA/DVI signal, although resolution support can vary widely. Some newer LCD TV sets can connect to a host computer via a bluetooth or WiFi wireless link. See SmartLink, Streamium.
LCD technology is based on the properties of polarized light. Two thin, polarized panels sandwich a thin liquid-crystal gel that is divided into individual pixels. An X/Y grid of wires allows each pixel in the array to be activated individually. When an LCD pixel darkens, it polarizes at 90 degrees to the polarizing screens.
This cross-polarizing blocks light from passing through the LCD screen where that pixel has darkened. The pixel darkens in proportion to the voltage applied to it: for a bright detail, a low voltage is applied to the pixel; for a dark shadow area, a higher voltage is applied. LCDs are not completely opaque to light, however; some light will always go through even the blackest LCD pixels.
TVs based on PVA and S-PVA LCD panels deliver a broad angle of view, up to 178 degrees. They also deliver an adequate contrast ratio for viewing bright scenes, as well as dark scenes in bright rooms. Dynamic contrast technique improves contrast when viewing dark scenes in a dark room. Alternatively, some manufacturers produce LCD TVs that throw light on the wall behind it to help make dark scenes look darker. PVA and S-PVA panels generally have difficulty with ghosting when going between different shades of dark colors, however in new televisions this is compensated to some degree using a technique called overdriving.
Moving pictures on a CRT TV do not exhibit any sort of "ghosting" because the CRT's phosphor, charged by the strike of electrons, emits most of the light in a very short time, under 1 ms, compared with the refresh period of e.g. 20 ms (for 50 fps video). In LCDs, each pixel emits light of set intensity for a full period of 20 ms (in this example), plus the time it takes for it to switch to the next state, typically 12 to 25 ms.
The second time (called the "response time") can be shortened by the panel design (for black-to-white transitions), and by using the technique called overdriving (for black-to-gray and gray-to-gray transitions); however this only can go down to as short as the refresh period.
This is usually enough for watching film-based material, where the refresh period is so long (1/24 s, or 41.(6) ms), and jitter is so strong on moving objects, that film producers actually almost always try to keep object of interest immobile in the film's frame.
Video material, shot at 50 or 60 frames a second, actually tries to capture the motion. When the eye of a viewer tracks a moving object in video, it doesn't jump to its next predicted position on the screen with every refresh cycle, but it moves smoothly; thus the TV must display the moving object in "correct" places for as long as possible, and erase it from outdated places as quickly as possible.
Although ghosting was a problem when LCD TVs were newer, the manufacturers have been able to shorten response time to 4ms on many computer monitors and around an average of 8 ms for TVs.
There are two emerging techniques to solve this problem. First, the backlight of the LCD panel may be fired during a shorter period of time than the refresh period, preferably as short as possible, and preferably when the pixel has already settled to the intended brightness. This technique resurrects the flicker problem of the CRTs, because the eye is able to sense flicker at the typical 50 or 60 Hz refresh rates.
Another approach is to double the refresh rate of the LCD panel, and reconstruct the intermediate frames using various motion compensation techniques, extensively tested on high-end "100 Hz" CRT televisions in Europe.
The best approach may be a combination of two, possibly allowing the viewer to switch them on or off when viewing video- or film-based material.
Some manufacturers are also experimenting with extending color reproduction of LCD televisions. Although current LCD panels are able to deliver all sRGB colors using an appropriate combination of backlight's spectrum and optical filters, manufacturers want to display even more colours. One of the approaches is to use a fourth, or even fifth and sixth color in the optical color filter array. Another approach is to use two sets of suitably narrowband backlights (e.g. LED), with slightly differing colors, in combination with broadband optical filters in the panel, and alternating backlights each consecutive frame.
Fully using the extended colour gamut will naturally require an appropriately captured material and some modifications to the distribution channel. Otherwise, the only use of the extra colors would be to let the viewer boost the color saturation of the TV picture beyond what was intended by the producer, but avoiding the otherwise unavoidable loss of detail ("burnout") in saturated areas.
Early LCD television had drawbacks relative to traditional visual display technologies. It displayed fast-moving action with "ghosting" and could be viewed best only when looking directly at the screen or from a slight angle. These problems have largely been overcome in recent years, and LCD televisions, along with plasma displays, have taken over the dominant market position worldwide from cathode ray displays. The LCD design has the additional advantage of being more efficient in the use of electricity than the CRT design.
Modern LCD TV sets are geographically universal because they have a multisystem tuner, to display PAL, NTSC and SECAM norms. They also include an electronic (step-down & step-up) transformer that automatically can use 110/250 V AC indifferently and universal grounded adapter plugs.
Also, the vast majority are no longer just for TV and HDTV (DVB). They can also be used as a computer monitor with a VGA/DVI signal, although resolution support can vary widely. Some newer LCD TV sets can connect to a host computer via a bluetooth or WiFi wireless link. See SmartLink, Streamium.
LCD technology is based on the properties of polarized light. Two thin, polarized panels sandwich a thin liquid-crystal gel that is divided into individual pixels. An X/Y grid of wires allows each pixel in the array to be activated individually. When an LCD pixel darkens, it polarizes at 90 degrees to the polarizing screens.
This cross-polarizing blocks light from passing through the LCD screen where that pixel has darkened. The pixel darkens in proportion to the voltage applied to it: for a bright detail, a low voltage is applied to the pixel; for a dark shadow area, a higher voltage is applied. LCDs are not completely opaque to light, however; some light will always go through even the blackest LCD pixels.
TVs based on PVA and S-PVA LCD panels deliver a broad angle of view, up to 178 degrees. They also deliver an adequate contrast ratio for viewing bright scenes, as well as dark scenes in bright rooms. Dynamic contrast technique improves contrast when viewing dark scenes in a dark room. Alternatively, some manufacturers produce LCD TVs that throw light on the wall behind it to help make dark scenes look darker. PVA and S-PVA panels generally have difficulty with ghosting when going between different shades of dark colors, however in new televisions this is compensated to some degree using a technique called overdriving.
Moving pictures on a CRT TV do not exhibit any sort of "ghosting" because the CRT's phosphor, charged by the strike of electrons, emits most of the light in a very short time, under 1 ms, compared with the refresh period of e.g. 20 ms (for 50 fps video). In LCDs, each pixel emits light of set intensity for a full period of 20 ms (in this example), plus the time it takes for it to switch to the next state, typically 12 to 25 ms.
The second time (called the "response time") can be shortened by the panel design (for black-to-white transitions), and by using the technique called overdriving (for black-to-gray and gray-to-gray transitions); however this only can go down to as short as the refresh period.
This is usually enough for watching film-based material, where the refresh period is so long (1/24 s, or 41.(6) ms), and jitter is so strong on moving objects, that film producers actually almost always try to keep object of interest immobile in the film's frame.
Video material, shot at 50 or 60 frames a second, actually tries to capture the motion. When the eye of a viewer tracks a moving object in video, it doesn't jump to its next predicted position on the screen with every refresh cycle, but it moves smoothly; thus the TV must display the moving object in "correct" places for as long as possible, and erase it from outdated places as quickly as possible.
Although ghosting was a problem when LCD TVs were newer, the manufacturers have been able to shorten response time to 4ms on many computer monitors and around an average of 8 ms for TVs.
There are two emerging techniques to solve this problem. First, the backlight of the LCD panel may be fired during a shorter period of time than the refresh period, preferably as short as possible, and preferably when the pixel has already settled to the intended brightness. This technique resurrects the flicker problem of the CRTs, because the eye is able to sense flicker at the typical 50 or 60 Hz refresh rates.
Another approach is to double the refresh rate of the LCD panel, and reconstruct the intermediate frames using various motion compensation techniques, extensively tested on high-end "100 Hz" CRT televisions in Europe.
The best approach may be a combination of two, possibly allowing the viewer to switch them on or off when viewing video- or film-based material.
Some manufacturers are also experimenting with extending color reproduction of LCD televisions. Although current LCD panels are able to deliver all sRGB colors using an appropriate combination of backlight's spectrum and optical filters, manufacturers want to display even more colours. One of the approaches is to use a fourth, or even fifth and sixth color in the optical color filter array. Another approach is to use two sets of suitably narrowband backlights (e.g. LED), with slightly differing colors, in combination with broadband optical filters in the panel, and alternating backlights each consecutive frame.
Fully using the extended colour gamut will naturally require an appropriately captured material and some modifications to the distribution channel. Otherwise, the only use of the extra colors would be to let the viewer boost the color saturation of the TV picture beyond what was intended by the producer, but avoiding the otherwise unavoidable loss of detail ("burnout") in saturated areas.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar