Q. I have a philips LCD monitor which is 4 years old.When I am using my pc it suddenly goes blank and stops working.Sometimes this happens after 2 hours,sometimes after 15 minutes.
On certain occasions it shows me a message "change display to 1280 x 1024 (60Hz).I have tried that but it had no effect.How do I determine what the problem is?
Note:Sometimes the display comes back on after a second or two and it continues to work like nothing happened.
On certain occasions it shows me a message "change display to 1280 x 1024 (60Hz).I have tried that but it had no effect.How do I determine what the problem is?
Note:Sometimes the display comes back on after a second or two and it continues to work like nothing happened.
A. Assuming you've already checked your operating system's screensaver settings, and made sure there aren't any power-saving settings enabled on the monitor's hardware itself, it could be because there's a subtle incompatibility between your video card, video driver, and the monitor itself.
If you're running Windows, remove all the video and monitor references from the Device Manager and reboot to let Windows rediscover and refresh the setup.
If it only detects your monitor as "Generic LCD monitor" or some such, and the problem is still occurring, you may want to check the internet to see if there's a specific driver for that monitor. In addition, look the model of monitor up, find out its hardware resolution, and set your Windows desktop resolution to the same numbers. Also make sure that your video card supports that particular resolution - some of the older cards don't work all that well with widescreen LCDs.
To get around that problem a bit, make sure you are running the very latest video drivers for your video card.
If you're running Windows, remove all the video and monitor references from the Device Manager and reboot to let Windows rediscover and refresh the setup.
If it only detects your monitor as "Generic LCD monitor" or some such, and the problem is still occurring, you may want to check the internet to see if there's a specific driver for that monitor. In addition, look the model of monitor up, find out its hardware resolution, and set your Windows desktop resolution to the same numbers. Also make sure that your video card supports that particular resolution - some of the older cards don't work all that well with widescreen LCDs.
To get around that problem a bit, make sure you are running the very latest video drivers for your video card.
Do I need a computer to watch TV on a LCD monitor?
Q. I'm planning to buy a LCD monitor for mainly to watch TV. Do i need a computer to watch tv with a TV tuner or can I just hook the cable straight to the monitor?
A. No you dont need a computer...but you will definitely need an External Tv Tuner Card...it costs about INR 1000 in india..Plus you will get a remote control with it...So u can use ur LCD Monitor as a normal television set..
and yes U can not directly hook the Cable with the Monitor
and yes U can not directly hook the Cable with the Monitor
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar